0

Out of 0 Ratings

Owner's of the VTech Cordless Telephone Vtech Cordless Phone gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 44
 
26
I cannot dial
out.
Make sure there is a dial
tone before dialing. It is
normal if the handset
takes a second or two
to synchronize with the
telephone base before
producing a dial tone. Wait
an extra second before
dialing.
Eliminate any background
noise. Mute the handset
before dialing, or dial
from another room in
your home with less
background noise.
The display
shows To
register HS...
and ...see
manual
alternately.
The handset
does not work
at all.
The handset is
deregistered from the
telephone base.
Place the handset in the
telephone base to register
it back. The handset
shows Registered and
you hear a beep when
the registration process
completes. This process
takes about 90 seconds to
complete.
The display
shows Low
battery.
Place the handset in the
telephone base or charger
for charging.
The battery
does not
charge in the
handset or
the handset
battery does
not accept
charge.
Make sure the handset is
placed in the telephone
base or charger correctly.
If the battery is completely
depleted, charge the
battery for at least 30
minutes before use.
You may need to purchase
a new battery.
The telephone
does not ring
when there is
an incoming
call.
Make sure the ringer
volume is not set to off.
The handset may be too
far from the telephone
base. Move it closer to the
telephone base.
My handset
beeps
and is not
performing
normally.
Move the handset closer
to the telephone base. It
may be out of range.
I hear other
calls when
using the
telephone.
Disconnect the telephone
base from the telephone
wall jack. Plug in a
different telephone. If you
still hear other calls, the
problem is probably in
the wiring or telephone
service. Contact your
telephone service
provider.
I hear noise
on the
cordless
handset and
the keys do
not work.
Make sure the telephone
line cord is plugged in
securely.