Char-Broil Electric Grill Char-Broil Electric Grill User Manual

0

Out of 0 Ratings

Owner's of the Char-Broil Electric Grill Char-Broil Electric Grill gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
27
Grease Tray
Grease Pan
15
16
• LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank. Fill and leak-check before attaching
to grill and regulator. See Use and Care section to correctly Leak Test and perform the Burner Flame Check.
• Place Lp tank into hole in bottom shelf with tank collar opening facing front of grill as shown. Finger tighten tank retainer screw to
hold LP tank securely in place. Insert regulator through the large hole on left side panel.
CAUTION
Failure to install tank correctly may
allow gas hose to be damaged in
operation, resulting in the risk of fire.
LP Tank
LP Cylinder
(not included)
Always keep LP cylinders in
upright position during use,
transport, and storage.
Regulator
Cylinder screw at rear of cart
Tank Retainer Screw
• Attach the heat shield to grease tray with #8x3/8” sheet metal screws (A).
• Place grease pan into grease tray, then place the tray into the cart (B).
A
B
Heat Shield
Grease Tray
CAUTION
Failure to install grease tray and
grease pan will cause hot grease to
drip from bottom of grill with risk of
fire or property damage.
#8x3/8"
Sheet Metal Screws
Qty. 4

   Find Your Products By Category