ProScan Flat Panel Television Sears Flat Panel Television User Manual

0

Out of 0 Ratings

Owner's of the ProScan Flat Panel Television Sears Flat Panel Television gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 34
 
Troubleshooting
The following
table contains the common problems and the solutions to these problems. Please check this list before
you contact the technicians.
Pr
oblems
Solutions
NO PICTURE
Connect pow
er cord correctly.
T
urn on power.
Connect vide
o cable correctly.
Select the input signal sour
ce with proper cable connection with the source
button.
ABNO
RMAL
COLORS
Match the colors on the cables to the ports off the back of the television.
I.E. red cable to red colored port.
PICTURE IS
T
OO DARK
Adjust your contrast, brightness and lamp settings from the OSD Menu.
For adjust controls
AUDI
O ONLY
NO PICTURE
Make sure you have connected both your video and audio cables.
The
TV’s tuner signal must not be lower than 65 %.
PICTURE ONL
Y
NO AUDIO
Make sure the audio cable is connected.
Readjust y
our volume via the remote control.
The
TV’s tuner signal must not be lower than 65 %.
REMOTE
CONTR
OL
DOES NOT
WORK
Turn off the TV, unplug it from the socket. Remove the batteries out o
f
the rem
ote for 30 minutes. Press the remote buttons and the power
b
utton
randomly for a good 2 seconds, and then reinstall the batteries.
Try the remote to see if it works. For battery removal instructions.
The TV’
s remote sensor is also housed in the same place as the power
indicator light. Please make sure there is line of sight from the remote
control’s front sensor to the remote sensor of the TV.
CANN
OT
RECEIVE
SUFFICIENT
CHANNELS
THROUGH
THE
ATSC/NTSC
TUNER
The TV’s tuner signal must not be lower than 65 %. Change the
direction of your antenna and rescan your channels. If you have cable
call up your cable company and ask about signal strength of your local
cable.
NO COL
OR
Please adjust your picture setup and make sure the saturation and the RGB
are not turned all the way down. For adjustment controls.
The
TV’s tuner signal must not be lower than 65 %. Check your signal.
WEAK SIG
NAL
OR NO
PROGRAM
SYMBOL ON
SCREEN
The TV’s tuner signal must not be lower than 65 %. Change the
direction of your antenna and rescan your channels. If you have cable
call up your cable company and ask about signal strength of your local
cable.
TV’S
UNI
VERSAL
REMOTE
CODE
This televisi
on follows NEC’s universal remote code. To find the
actual code you must r
ead through your own universal remote’s guide
book.
27

   Find Your Products By Category