Pioneer Car Stereo System Pioneer Car Stereo System User Manual

4.0

Out of 2 Ratings

Owner's of the Pioneer Car Stereo System Pioneer Car Stereo System gave it a score of 4.0 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.5 out of 5

  • Maintenance

    4.0 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    3.5 out of 5
of 44
 
AUX (auxiliary input)
Activate this settingwhen using an auxiliary de-
vice connected tothis unit.
1 Press M.C. toturn AUX on oroff.
Switching the dimmer setting
You can adjust the brightness of illumination.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Press M.C. to select the desired setting.
OFF (off)—ON (on)
! You can also changethe dimmer settingby
pressing and holding
/DIMMER.
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu func-
tion.
Once selected, the initial menu function below
can be adjusted.
SP-P/O MODE (rearoutput and preout setting)
The rear speakerleads output and theRCA output
of this unitcan be used toconnect a full-range
speaker or subwoofer.Select a suitableoption for
your connection.
1 Press M.C. todisplay the setting mode.
2 TurnM.C. to select the desiredsetting.
You can selectany one of the optionsin the fol-
lowing list:
! REAR/SUB.W – Selectwhen there is afull-
range speaker connectedto the rear speak-
er leads outputand there is asubwoofer
connected to theRCA output.
! SUB.W/SUB.W – Selectwhen there is a
subwoofer connected directlyto the rear
speaker leads outputwithout any auxiliary
amp and thereis a subwoofer connected
to the RCAoutput.
! REAR/REAR – Selectwhen there is afull-
range speaker connectedto the rear speak-
er leads outputand the RCA output.
If there is afull-range speaker connectedto
the rear speakerleads output and theRCA
output is notused, you may selecteither
REAR/SUB.Wor REAR/REAR.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
4 Turn M.C. to select the system menu
function.
Once selected, the following system menu func-
tions can be adjusted.
For details, refer to Systemmenu on the pre-
vious page.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
(auxiliary input) on this page.
Switching the display
Selecting the desiredtext information
1 Press DISP tocycle between the following:
! Source name
! Source name andclock
If an unwanted display appears
Turn off the unwanted display using the proce-
dures listed below.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to display DEMO OFF and press
to select.
4 Turn M.C. to switch to YES.
5 Press M.C. to select.
Operating this unit
8
Section
Operating this unit
En
02

   Find Your Products By Category