0

Out of 0 Ratings

Owner's of the Canon Digital Camera EOS70DBODY gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 468
 
105
S Selecting the AF AreaN
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
1
Press the <S> or <B> button.
(9)
X The AF points will be displayed in the
viewfinder.
In the Zone AF mode, the selected
zone will be displayed.
2
Select an AF point.
The AF point selection will change in
the direction you tilt <9>. If you
press <0>, the center AF point (or
center zone) will be selected.
You can also select a horizontal AF
point by turning the <6> dial and
select a vertical AF point by turning
the <5> dial.
In the Zone AF mode, turning the
<6> or <5> dial will change the
zone in a looping sequence.
Selecting the AF Point Manually
When you hold down the <Q> button and turn the <6> dial, you can
select a vertical AF point.
When you press the <S> or <B> button, the LCD panel displays the
following:
• 19-point automatic selection AF and Zone AF (manual zone selection):
AF
• 1 pt AF (Manual selection): SEL (Center)/SEL AF (Off center)
With [8C.Fn II-10: Manual AF pt. selec. pattern], you can set either
[Stops at AF area edges] or [Continuous] (p.373).
COPY