0

Out of 0 Ratings

Owner's of the Canon Digital Camera EOS70DBODY gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 468
 
8: Fine Adjustment of AF’s Point of Focus
382
When [ Clear all] appears at the bottom of the screen, pressing the
<L> button will clear all the adjustments made for [1: All by same
amount] and [2: Adjust by lens].
Notes for AF Microadjustment
Clearing All AF Microadjustments
When shooting with the intermediate range (focal length) of a zoom lens, the
AF’s point of focus is corrected automatically relative to the adjustments
made for the wide-angle and telephoto ends. Even if only the wide-angle or
telephoto end has been adjusted, a correction will be made automatically for
the intermediate range.
The AF’s point of focus will vary slightly depending on the subject
conditions, brightness, zoom position, and other shooting conditions.
Therefore, even if you perform AF Microadjustment, focus may still not
be achieved at the suitable position.
If you clear all the Custom Function settings (p.362), the AF
Microadjustment will be retained. However, the setting will become [0:
Disable].
It is best to make the adjustment at the actual location where you will
shoot. This will make the adjustment more precise.
Using a tripod when making the adjustment is recommended.
For checking the adjustment result, shooting at the 73 image-recording
quality is recommended.
The adjustment amount of one stop varies depending on the maximum
aperture of the lens. Keep adjusting, shooting, and checking the focus
repeatedly to adjust the AF’s point of focus.
The AF Microadjustment will not be applied to u+ Tracking, FlexiZone -
Multi, and FlexiZone - Single during Live View shooting and movie
shooting.
COPY