Canon Digital Camera EOS70DBODY User Manual

0

Out of 0 Ratings

Owner's of the Canon Digital Camera EOS70DBODY gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 468
 
167
Exposure compensation can brighten (increased exposure) or darken
(decreased exposure) the standard exposure set by the camera.
Exposure compensation can be set in the d/s/f shooting modes.
Although you can set the exposure compensation up to ±5 stops in 1/3-
stop increments, the exposure compensation indicator in the viewfinder
and on the LCD panel can only display the setting up to ±3 stops. If you
want to set the exposure compensation setting beyond ±3 stops, use the
Quick Control (p.50) or follow the instructions for
[z3: Expo.comp./
AEB] on the next page.
1
Check the exposure level indicator.
Press the shutter button halfway
(0)
and check the exposure level indicator.
2
Set the exposure compensation amount.
While looking at the viewfinder or
LCD panel, turn the <5> dial.
If it cannot be set, set the <
R
>
switch downward, then turn the <
5
> dial.
3
Take the picture.
To cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
Setting Exposure CompensationN
Increased exposure for a
brighter image
Decreased exposure for a
darker image
If [z3: Auto Lighting Optimizer] (p.140) is set to any setting other than
[Disable], the image may look bright even if a decreased exposure
compensation is set.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
After setting the exposure compensation amount, you can set the
<R> switch upward to prevent the exposure compensation amount
from changing accidentally.
If the exposure compensation amount exceeds ±3 stops, the end of the
exposure level indicator will display <I> or <J>.
COPY

   Find Your Products By Category