Pioneer Car Stereo System Pioneer Car Stereo System User Manual

0

Out of 0 Ratings

Owner's of the Pioneer Car Stereo System Pioneer Car Stereo System gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
4 Turn M.C. to select the illumination
color.
You can select one option from the following
list.
! 27 preset colors (WHITE to ROSE)
! SCAN (cycle through all colors)
! Three sets of colors (WARM, AMBIENT,
CALM)
Notes
! You cannot select CUSTOM in this function.
! Once you select a color in this function, colors
on the keys and display of this unit automati-
cally switch to the color you selected.
! For details about colors on the list, refer to Se-
lecting the key color from the illumination color
list on the previous page.
Customizing the illumination color
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select ILLUMI.
3 Turn M.C. to display Key or Display.
Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
5 Press M.C. to select the primary color.
R (red)—G (green) —B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three
of R (red), G (green), and B (blue) at the same
time.
# You can also perform the same operation on
other colors.
Notes
! You cannot create a custom illumination color
when SCAN or a set of colors (WARM,
AMBIENT,orCALM) is selected.
! You can create custom illumination colors for
both Key and Display.
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
% Press and hold EQ/DISP OFF.
Pressing and holding EQ/DISP OFF switches
the display indication and button illumination
on or off.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
En
39
Section
02
Operating this unit
Operating this unit

   Find Your Products By Category