Razor Bicycle Accessories Razor Bicycle Accessories User Manual

0

Out of 0 Ratings

Owner's of the Razor Bicycle Accessories Razor Bicycle Accessories gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 11
 
Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Dirt Quad is 95 percent assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 4 for charging information).
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
DIRT QUAD. The Dirt Quad
has been built to certain Razor
design specifications. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible and may void your
warranty.
Required Tools
3mm, 5mm and 6mm
Allen wrenches
(included)
Brake Lever
Speed Control
Drive
Chain
Front Fork
Phillips
screwdriver
(included)
8mm and 10mm open
wrench
(included)
Bicycle tire pump for
Schrader valves, with
pressure gauge
(Not Included)
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Charger
(Note: Charger design may vary
from one shown)

   Find Your Products By Category