Razor Bicycle Accessories Razor Bicycle Accessories User Manual

0

Out of 0 Ratings

Owner's of the Razor Bicycle Accessories Razor Bicycle Accessories gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 11
 
ASSEMBLY AND SET-UP
1 Using the 6mm Allen
wrench, remove bolts from
handlebar clamp.
Note: Handlebar clamps are
located in the plastic bag
with owner’s manual and
charger.
2 Place handlebars in handle-
bar clamp in upright, vertical
position.
3 Insert bolts and tighten
securely. When properly
tightened, the handlebars
should not move forward or
back.
Note: The gap between the
upper clamp and lower clamp
should be equal on both sides of
handlebar.
WARNING:
Failing to properly adjust and
tighten the bolts that affix the
handlebars can cause you to
lose control and crash.
3
q Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of
manufacturing and your purchase. Inflate the tires to the correct PSI before first time use.
Note: The pressurized air
supplies found at gasoline
stations are designed to inflate
high-volume automobile tires.
If you decide to use such an
air supply to inflate your tires,
first make sure the pressure
gauge is working, then use very
short bursts to inflate to the
correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.
Using a bicycle tire pump equipped for a Schrader valve, inflate the tires to the PSI indicated on the side-
wall of the tire.
q Testing the Brake
To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted
with a cable adjuster to compensate for cable stretch and/or to fine-tune the lever movement to brake
engagement. If brake is not engaging properly, follow instructions for adjusting the brakes outlined below.
q Attaching the Handlebars
Tools required: 6mm Allen wrench
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

   Find Your Products By Category