Razor Bicycle Accessories Razor Bicycle Accessories User Manual

0

Out of 0 Ratings

Owner's of the Razor Bicycle Accessories Razor Bicycle Accessories gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 11
 
5
REPAIR AND MAINTENANCE
q Replacing the Fuse
WARNING:
To prevent shock, please follow
the instructions accordingly
and do not skip or combine any
steps.
2 Under the front fender and
through the frame, locate the
fuse box attached to the top of
the battery.
3 Open the fuse cover to
expose the fuse.
4 Remove the fuse and replace
with a new one of equal
amperage.
Note: Amperage rating is
located on top of fuse.
5 Close the fuse cover.
Amperage
number
q Replacing the Chain
Tools required: 6mm Allen wrench, 10mm open wrench and Phillips screwdriver.
1 Make sure the power switch
is turned OFF.
2 Remove the bolt on the
inside of the rear wheel.
Remove nut and pull bolt out
of axle.
3 Remove the 3 screws from
the top half of the chain guard
and remove.
1 Remove the bolt and wash-
ers on the outside of the rear
wheel.
5 Spread the chain tensioner
apart to loosen chain.
6 Remove chain from both
sprockets and replace with new
chain.
4 Remove the 2 screws from
the bottom half of the chain
guard and remove.
WARNING:
Do not touch motor after use.
Motor is (or can be) very hot.

   Find Your Products By Category