Brother Sewing Machine PC-420PRW User Manual

0

Out of 0 Ratings

Owner's of the Brother Sewing Machine PC-420PRW gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 153
 
Troubleshooting 139
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
The fabric is
wrinkled.
The upper thread was not threaded
correctly, or the bobbin is incor-
rectly installed.
Correctly thread the upper thread
and correctly install the bobbin
thread.
page 22, 24
The spool is incorrectly installed. Correctly install the spool. page 24
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 33
The needle is bent or blunt. Replace the needle. page 34
If thin fabrics are being sewn, the
stitch is too coarse.
Shorten the stitch length or sew with
stabilizer material under the fabric.
page 56
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 54
Stitches are
skipped.
The upper thread was not threaded
correctly.
Correct the upper threading. page 24
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 33
The needle is bent or blunt. Replace the needle. page 34
The needle is incorrectly installed. Correctly install the needle. page 35
Dust has accumulated under the
needle plate or in the shuttle.
Remove the needle plate cover and
clean the shuttle.
page 135
A high-pitched
noise is made
while sewing.
Dust has accumulated in the feed
dogs or in the shuttle.
Clean the shuttle. page 135
The upper thread was not threaded
correctly.
Correct the upper threading. page 24
The shuttle is scratched, or has a
burr on it.
Replace the shuttle.
Contact your retailer or the nearest
authorized service center.
–
A bobbin designed specifically for
this machine is not used.
Incorrect bobbins will not work prop-
erly. Only use a bobbin designed spe-
cifically for this machine.
page 18
The needle
threader cannot
be used.
The needle was not raised.
Press the needle position button to
raise the needle.
page 27
The needle is incorrectly installed. Correctly install the needle. page 35
The stitch is not
sewn correctly.
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 128
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 54
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 135
Symptom Probable Cause Remedy Reference

   Find Your Products By Category